Product
Product Overview

Cable puller
Manual cable pulling device

pulling force - speed weight Article-No.
3 kN
-
-
18 kg
on req.


Electric capstan winch SWE-B
SWE-B is ideally suited for short cable pulls.
The two different capstan haeds are driven by a drilling machine (not included).
Maximum pulling force depends on the used drilling machine.

pulling force - speed weight Article-No.
5 / 25 kN
-
4 bzw. 8 m/min
18 kg
on req.


Electric capstan winch SWE
KSW-E - KATIMEX Electric capstan winches

due to the use of 2 different capstan heads, the work can be done either with high speed (8 m/min) and low pulling force, or with low speed (4 m/min) and high pulling force.

ATTENTION: These winches are not suited for vertical pulls.
OPTIONS: Foot switch for increased safety, compact Trolley for safe and comfortable transport.

Dimensions: 608 x 376 x 400mm
vergrößern

Typ pulling force speed V/A weight Article-No.
KSW-E 500
2.5 / 5.0kN
8 / 4 m/min
0.55kW / 230V
35 kg
105510
KSW-E 800
4.0 / 8.0kN
8 / 4 m/min
1.10kW / 230V
39 kg
105511
KSW-E 1200
6.0 / 12.0kN
8 / 4 m/min
1.10kW / 400V
42 kg
105513
KSW-E 2000
10.0 / 20.0kN
8 / 4 m/min
1.50kW / 230V
58 kg
105512


Transport Trolley

for safe and comfortable transport of KATIMEX capstan winches.
Powder coated steel tube frame.
vergrößern

Typ weight Article-No.
OPT-01
4.3 kg
105516


Foot Switch

optional for 240V electrical capstan winches KSW-E 500, 800 and 2000.
Simply switched between power socket and winch.
Protection type IP65
vergrößern

Typ weight Article-No.
OPT-02
1.8 kg
105515


Ground Nails

for easy fixing the winches on loose ground or where a fixing with tension belts is not possible.
vergrößern

Typ weight Article-No.
OPT-03
0.75 kg
105517


Tension Belts with Ratchet

are suited best as a safety element on cable trays and everywhere, where the usage of ground nails is prohibited.Fits to the side plates of the winches.
vergrößern

Typ length width pulling force weight Article-No.
OPT-04
500 cm    
25 mm    
8.0 kN     
0.34 kg
105518
OPT-05
800 cm    
50 mm    
40.0 kN     
1.85 kg
105519


Polyester Ropes

high load capacity, ductile polyester ropes, 16-times (8 and 12mm) or 20-times (16mm) woven.
Eyelets on both sides.

Further versions on request
vergrößern

Typ weight Article-No.
PFS 8-150
150 m
8 mm
15.5 kN
7.3 kg
105650
PFS 8-200
200 m
8 mm
15.5 kN
9.5 kg
105651
PFS 8-250
250 m
8 mm
15.5 kN
12.2 kg
105652
PFS 12-150
150 m
12 mm
24.0 kN
16.7 kg
105654
PFS 12-200
200 m
12 mm
24.0 kN
22.0 kg
105655
PFS 12-250
250 m
12 mm
24.0 kN
32.7 kg
105656
PFS 16-150
150 m
16 mm
42.0 kN
30.7 kg
105657
PFS 16-200
200 m
16 mm
42.0 kN
40.6 kg
105658
PFS 16-250
250 m
16 mm
42.0 kN
56.0 kg
105659


Petrol engine capstan winch KSW-B
KSW-B - KATIMEX Petrol capstan winch with 4 - stroke engine

ATTENTION: The winches are not suited for vertical pulls.
OPTIONS: Compact Trolley for safe and comfortable transport.

Dimensions: 653 x 376 x 400mm

pulling force 1.8 speed weight Article-No.
3.6 / 1.9
1.8 kW
7.7 / 14.3
26 kg
on req.


Hydraulic auxiliary winch HSW
Ideally suited for pre-wiring and fiberglass line pulls.
Thanks to its hydraulic driving unit, the maximum pulling can be archived independend from the speed or the drum diameter.

Possible rope length:
- drum type 5: 3.200m with 5

pulling force 1.8 speed weight Article-No.
12 / 8 kN
1.8 kW
-
150 kg
on req.


Hydraulic capstan winch for cable pulls up to 2.0 tons
KZW is a multi-purpose capstan winch suitable for cable pulls, pre-wiring, calibrating and inliner installations.

Possible rope length:
- drum type 5: 3.200m with 5mm steel rope
- drum type 5: 1.800m with 6mm steel rope

pulling force 6.6 speed weight Article-No.
15 / 20 kN
6.6 kW
20 m/min with capstan
340 kg
on req.


Hydraulic capstan winch for cable pulls up to 6.0 tons
KZM is a multi-purpose capstan winch suitable for overhead pulls, pre-wiring, calibrating and inliner installations.

pulling force speed weight Article-No.
30 - 60 kN
on req.




© 2011 Katimex Cielker GmbH